Product Description
Product Description
Product function: It’s suitable For low-efficiency wells, test wells and remote wells wellhead natural gas recovery, local production of CNG. finished products The dry gas recovery skid can adapt to the characteristics and working conditions of well gas, the installation is simple, the period is short, and it is convenient for the rapid transfer of equipment.
The equipment flow diagram is as follows:
To better adapt to the field conditions of well gas recovery, the air intake separation system uses a high pressure separator to separate the gas and liquid level, using a liquid level controller to automatically control the liquid level; the pressurization system uses a hydraulic piston compressor, which can meet the intake pressure range of 3-20 MPa. Pressurization to 25 MPa, is more energy-efficient and leak-free than traditional mechanical pressurization, with low failure rate, high reliability and simple maintenance; the drying system adopts the A,B tower molecular sieve mode, which can be dried and regenerated simultaneously, with a maximum drying capacity of 2000 Nm3h, dew point is -55ºC; the control system is controlled by PLC logic control program to control each process such as separation, pressurization, drying, metering, instrument wind and so on, to realize unattended, automatic opening / stopping control; The filling metering system adopts mass Flowmeter, which meets the requirements of the state on metering, measuring range :1~4000 N m3/ h.
Application and parameter:
1.Gas intake separation system 2.Supercharging system 3.Drying system 4.Control system
5.Filling metering system 6.Fuel gas supply system 7.Housing system
| Structure | skid |
| Suction pressure | 3-20Mpa |
| Discharge pressure | 25Mpa |
| Gas treated ( Nm3/d) | 20000-50000 |
| Amount of treatment (t/d) | 50 |
| Main motor power | 74kw |
| Noise | ≤75dBa |
| Size | 9000mm*3000mm*3000mm |
| Total power | 110KW |
| Fuel tank (L) | 1000 |
| Scope of measurement (Nm3/h) | 1-4000 |
| Weight | ≈22t |
Product Advantage:
1. Skidding, high degree of integration, good flexibility, short construction period.
2.High degree of automation, centralized control points, low labor intensity.
3. Compressor adopts hydraulic piston type, which has the characteristics of wide intake range, energy saving, no leakage, very low failure rate and simple maintenance, so it can better adapt to the characteristics of large variation of wellbore pressure range.
4. No need to be equipped with water jacket CHINAMFG and pressure regulating equipment, safety risks are small, no throttling energy waste.
5.Use high pressure post dehydration, dehydration effect is good, conducive to product sales.
6. Recovery process equipment has strong adaptability to wellhead pressure and components, and the equipment input cost is small.
Company Profile
HangZhou Qidakon Energy Equipment Co., Ltd was established in 2007 in HangZhou, ZheJiang Province, with a plant covering an area of 18,000 square meters. We are specializing in the R&D, production and sales of natural gas compressor series products, we adhere to the professional, fine, specialty, brand development of the road, to provide customers with the best overall technical solutions of high-tech enterprises. Professional production and manufacturing of natural gas compressor for CNG filling station and its service, professional production and manufacturing of natural gas compressor for oil and gas field natural gas extraction, recovery, gathering and transportation, storage and transportation and after-sales service, products and services have covered the CNG market all over the country and major domestic oil and gas fields, and radiation to Russia, India and other Belt and Road foreign markets.
Qidakon company has always been committed to technological innovation. Its core business team has more than 30 years of working experience in compressor design and manufacturing, and led the drafting of the industry standard for hydraulic natural gas compressors for automobile filling stations (JB/T11422-2013). Obtained nearly 100 national patents, won the national technology innovation fund, and the first in the industry through the whole machine safety explosion-proof certification, by the Ministry of Science and Technology technology innovation fund committee identified as the national technology innovation products, with its “safety, energy saving, environmental protection, investment province, simple structure and many other advantages, in more than 20 provinces (autonomous regions) used, Market share is among the best, its technical advancement, reliability, economy and industry leading position by the national attention.
Qidakon adheres to the enterprise mission of “gas melts everything, the way to secure the world”, adheres to the business philosophy of “customer first and sustainable development”, forms the core values of “loyalty and dedication, innovation and transcendence, truth-seeking and honest, fair sharing” and the enterprise spirit of “persistence, cooperation, gratitude, tolerance, dedication”, and is determined to become a global CHINAMFG brand of gas supercharging system.
Our Advantages
Professional R&D Team
About 100 technical patents
Industry standard setter
The national industry standard JB/T 11422-2013 setter, Hydraulic Natural Gas Compressor for Automobile Filling Station, drives the technical progress of the industry and leads the development direction of the industry.
Advanced production workshop and strict production process
Sapare parts area Welding
Assemble skiding Pre-factory commissioning
Strict quality control process and testing
Certification and Honor
Partner & Cases
CNG refueling station site
Indian partner
After Sales Service
Service Purpose: Cusomer’s Satisfaction Our Pursuit
Pre- Sale Services
Provide installation and commissioning training for customer operators according to customer requirements. At the same time, organize and register product information and set up customer files.
Services on sale
The prodessional technical service engineer guides the installation and commissioning on the side or on the line. Andwarning of the possible failure of the equipment.
After-Sales Service
Timely and rapid response ,24-hour on-line service, provide lifelong maintenance.
FAQ
1.How long is the lead-time of production?
90Days.
2. What is the configuration of the whole skid equipment?
According to different customer needs to do the country’s explosion-proof certification and industry certification.
3.Which sea ports are supported for shipment?
ZheJiang ,HangZhou or Other international ports in China.
4.What payment methods are supported?
T/T, LC, D/P D/D ect.
5.What technical support is available?
We provide basic parameters for customers’ reference before sales; conduct relevant certifications according to customers’ requirements during sales; be responsible for online debugging until successful operation after sales; arrange technicians to provide on-site guidance when necessary.
6.How long is the warranty period?
For a period of 12 months from the date of commissioning at end customer site or 15 months from the date of receipt by purchaser , whichever is earlier.
| After-sales Service: | 24 Hours |
|---|---|
| Warranty: | 12 Months |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Cylinder Arrangement: | Parallel Arrangement |
| Cylinder Position: | Vertical |
| Customization: |
Available
|
|
|---|
.webp)
Are There Specific Filtration Requirements for Oil-Free Compressors?
Yes, oil-free compressors have specific filtration requirements to ensure the quality and purity of the compressed air output. These filtration requirements are designed to address the unique characteristics of oil-free compressors and the potential contaminants that can be present in the intake air. Here’s a detailed explanation of the specific filtration requirements for oil-free compressors:
1. Pre-Filtration:
Pre-filtration is the first stage of filtration in oil-free compressors and is designed to remove larger particles, such as dust, dirt, and debris, from the intake air. These particles can enter the compressor and cause damage to internal components or affect the performance of downstream filtration stages. Pre-filters typically consist of pleated or mesh filters that capture particles of various sizes. The efficiency of pre-filters is usually specified in terms of their particle size removal capability, such as 5 microns or 10 microns.
2. Coalescing Filtration:
The coalescing filtration stage in oil-free compressors is responsible for removing smaller particles and coalescing water vapor into droplets for subsequent removal. This stage is crucial in ensuring that the compressed air remains free from fine particles and moisture, which can cause contamination and corrosion issues. Coalescing filters are designed with special media that capture and combine small particles and water droplets, allowing them to be easily separated from the compressed air. The efficiency of coalescing filters is typically specified in terms of their particulate removal capability and moisture removal efficiency, such as 0.01 microns and 99.9% respectively.
3. Activated Carbon Filtration:
Activated carbon filtration is often employed as a final stage in the filtration process of oil-free compressors. Activated carbon filters help eliminate odors and absorb any remaining oil vapors or hydrocarbons that might have bypassed the previous filtration stages. These filters contain activated carbon granules with a high surface area, allowing them to adsorb and trap odor-causing compounds and trace amounts of oil vapor. The efficiency of activated carbon filters is typically specified based on their odor removal capacity and oil vapor adsorption capacity.
It’s important to note that the specific filtration requirements for oil-free compressors may vary depending on the application and the desired air quality standards. Industries such as food and beverage, pharmaceuticals, electronics manufacturing, and painting often have more stringent filtration requirements to meet their specific air purity needs. In such cases, additional filtration stages, such as sterile filters or high-efficiency particulate air (HEPA) filters, may be incorporated to achieve the desired level of air quality.
Complying with industry standards and guidelines, such as ISO 8573, can provide guidance on the appropriate filtration requirements for oil-free compressors. These standards define specific limits for contaminants in compressed air, including oil content, particulate matter, and moisture, and can help determine the necessary filtration stages and their efficiency ratings.
By implementing the appropriate filtration requirements, oil-free compressors can ensure that the compressed air produced is clean, dry, and free from contaminants, meeting the specific air quality needs of various applications.
.webp)
What Is the Role of Filtration in Maintaining Air Quality in Oil-Free Compressors?
Filtration plays a crucial role in maintaining air quality in oil-free compressors. Here’s a detailed explanation of the role of filtration and its importance in ensuring clean and contaminant-free compressed air:
1. Removing Solid Particles:
One of the primary functions of filtration in oil-free compressors is to remove solid particles from the compressed air. Ambient air contains various contaminants such as dust, dirt, pollen, and other particulates. These particles can potentially damage downstream equipment, clog pneumatic components, and compromise the quality of the compressed air. Filtration systems, typically consisting of pre-filters and main filters, are used to capture and remove these solid particles, preventing them from entering the compressed air system.
2. Protecting Equipment:
Filtration helps protect the equipment and components of the compressed air system, including valves, cylinders, pneumatic tools, and instruments. Solid particles present in the compressed air can cause abrasion, wear, and damage to these components, leading to decreased performance, increased maintenance, and potential system failures. By effectively removing solid particles, filtration ensures the longevity and reliability of the equipment, reducing the need for frequent repairs and replacements.
3. Preventing Contamination:
Oil-free compressors are designed to produce clean, oil-free compressed air. However, certain contaminants can still find their way into the compressed air system. Filtration plays a vital role in preventing contamination by removing substances such as oil aerosols, water vapor, and microorganisms. These contaminants can be introduced through ambient air or can result from the compression process itself. Proper filtration ensures that the compressed air remains free from these contaminants, meeting the required air quality standards for specific applications.
4. Achieving Air Purity:
Many applications require compressed air with specific purity levels. For instance, in industries like pharmaceuticals, food and beverage, electronics, and healthcare, high-quality compressed air is essential to prevent product contamination or ensure the safety of sensitive processes. Filtration, along with other air treatment components such as dryers and separators, helps achieve the desired air purity levels by removing particulates, moisture, oil, and other impurities. This ensures that the compressed air meets the required standards and complies with industry regulations.
5. Extending Maintenance Intervals:
Efficient filtration in oil-free compressors can contribute to extended maintenance intervals. By effectively capturing and removing contaminants, filtration reduces the accumulation of debris and deposits within the compressed air system. This, in turn, reduces the frequency of maintenance tasks such as cleaning, purging, and component replacements. Extended maintenance intervals not only save time and labor but also minimize system downtime and associated costs.
6. Preserving Product Quality:
In applications where compressed air comes into direct contact with products or processes, maintaining air quality is crucial to preserve product integrity and quality. Contaminated compressed air can introduce impurities, odors, or foreign substances that may adversely affect the final product. Filtration ensures that the compressed air remains clean and free from contaminants, safeguarding the quality, purity, and consistency of the end products.
Overall, filtration plays a vital role in maintaining air quality in oil-free compressors. By removing solid particles, preventing contamination, achieving air purity, protecting equipment, extending maintenance intervals, and preserving product quality, filtration systems contribute to the reliable and efficient operation of compressed air systems in various industries and applications.
.webp)
What Are the Advantages of Using Oil-Free Air Compressors?
Oil-free air compressors offer several advantages over their oil-lubricated counterparts. These compressors are designed to deliver clean, oil-free compressed air and provide benefits in various applications. Here’s a detailed explanation of the advantages of using oil-free air compressors:
1. Clean and Oil-Free Air:
The primary advantage of oil-free air compressors is that they produce compressed air that is free from oil contamination. This makes them suitable for applications where oil-free air is crucial, such as in industries like food and beverage, pharmaceuticals, electronics, and painting. Oil-free compressed air ensures product quality, prevents contamination of sensitive equipment, and eliminates the risk of oil-related issues in downstream processes.
2. Reduced Maintenance:
Oil-free compressors generally require less maintenance compared to oil-lubricated compressors. Since there is no oil to change or monitor, maintenance tasks related to oil filtration, oil changes, and oil disposal are eliminated. This can result in cost savings, reduced downtime, and simplified maintenance schedules.
3. Elimination of Oil Contamination Risk:
With oil-free compressors, there is no risk of oil contaminating the compressed air system. This eliminates the need for additional filtration or separation equipment to remove oil from the compressed air. It simplifies the overall system design, reduces the risk of oil-related equipment failure, and minimizes the maintenance and associated costs.
4. Compact and Lightweight:
Oil-free compressors are often designed to be compact and lightweight, making them portable and easy to transport. This feature is advantageous for applications where mobility is required, such as construction sites, workshops, and on-site maintenance tasks.
5. Quiet Operation:
Oil-free compressors tend to operate at lower noise levels compared to oil-lubricated compressors. The absence of oil lubrication reduces the friction and mechanical noise, resulting in quieter operation. This makes oil-free compressors more suitable for noise-sensitive environments or applications where reduced noise levels are desired.
6. Environmental Considerations:
Oil-free air compressors are environmentally friendly due to the absence of oil. They eliminate the risk of oil spills or leaks that can harm the environment. Furthermore, oil-free compressors may require less energy consumption compared to oil-lubricated compressors, contributing to energy efficiency and reduced carbon footprint.
7. Lower Initial Cost:
In general, oil-free compressors tend to have a lower initial cost compared to oil-lubricated compressors. This can be advantageous for applications with budget constraints or when the specific requirements of the application align with the capabilities of oil-free compressors.
It’s important to note that oil-free air compressors may have certain limitations compared to oil-lubricated compressors. They may have lower maximum operating pressures and higher operating temperatures. Additionally, the absence of oil lubrication may result in slightly reduced efficiency and increased wear on certain components over time.
By considering these advantages, users can determine whether oil-free air compressors are suitable for their specific application and requirements.
editor by CX 2023-10-11